Wireless Infrastructure — it starts with SECURITY
Wireless networking is quickly becoming a defacto standard in the enterprise, streamlining business processes to deliver increased productivity, reduced costs and increased profitability. Security has remained one of the largest issues as companies struggle with how to ensure that data is protected during transmission and the network itself is secure. Wi-Fi Protected Access (WPA ) offered an interim security solution, but was not without constraints that resulted in increased security risks. The new WPA2 (802.11i) standards eliminate these vulnerabilities and offer truly robust security for wireless networks.
Corporations are increasingly being asked to allow wireless network access to increase business productivity, and corporate security officers must provide assurance that corporate data is protected, security risks are mitigated and regulatory compliance is achieved. Let’s look at:
- The risks of wireless insecurity
- The progression of security standards and capabilities pertaining to Wi-Fi security
- How the 802.11i standard provides robust security for demanding wireless environments
Risks Of Wireless Insecurity
The advent of wireless computing and the massive processing power available within portable devices provides organizations with an unprecedented ability to provide flexible computing services on-demand to enable business initiatives. While functionality is being rapidly adopted, the process complicates the ability of IT departments to control their own Intranets and enforce their own standards. Where the high performance computers of yesterday required a dedicated room and special environmental controls, today’s computers arrive via a visitor’s pocket or traveling employee’s notebook, and require no hard-wired connections to reach the corporate Intranet.
With this great mobile computing power and flexibility comes major risk. War driving can enable hackers to obtain unauthorized access to corporate resources and proprietary intellectual property. The login credentials of legitimate wireless users can be sniffed or cracked. Malicious insiders can move throughout an enterprise network with impunity via sessions with insecure wireless access points.
The consequences of these risks are significant. We have seen spammers and phishers leverage open access points to send unsolicited and malicious electronic mail in stealth mode. Worms are introduced through a new infection vector. Customer lists and account numbers are routinely downloaded to portable devices. Enterprise databases are accessed and modified by unauthorized users.
The bottom line is that wireless insecurity, as long as it is unaddressed, enables the theft of data, lowers productivity, and causes quantifiable financial losses.
Understanding Wi-Fi Protected Access (WPA)
WPA was based on an early draft of IEEE 802.11i to address critical flaws in WEP. These security shortcomings required an interim solution that would not require hardware upgrades or replacements for existing consumer devices. A series of compromises was made in order to “fix” WEP through software-based firmware upgrades. The majority of existing WEP devices had extremely minimal CPU resources, often based on sub-40 MHz chips based on older hardware such as the 80486. As these devices are typically incapable of encryption work, the implementation of RC4 for WEP was often offloaded onto secondary chips. This is a primary consideration. The replacement for WEP must still use RC4 and RC4 primitives for any and all encryption. The main problems with WEP are:
- WEP does not prevent forgery of packets.
- WEP does not prevent replay attacks. Attackers can simply record and replay packets as desired and they will be accepted as legitimate.
- WEP uses RC4 improperly. The keys used are very weak, and can be brute-forced on standard computers in hours to minutes, using freely available software.
- WEP reuses initialization vectors. A variety of available cryptanalytic methods can decrypt data without knowing the encryption key.
- WEP allows an attacker to undetectably modify a message without knowing the encryption key.
The IEEE’s primary response to the problems of WEP was Temporal Key Integrity Protocol (TKIP). TKIP acts as a wrapper for WEP, adding a layer of security around WEP’s otherwise weak encryption.
One of the first problems TKIP solves is that of key length. WEP uses small keys, and their effective length is shorter due to several design flaws. TKIP uniformly uses a 128-bit encryption key, and while WEP can support 128-bit encryption keys, maintaining compatibility with older WEP devices inevitably leads to standardization upon 64-bit encryption keys within a wireless network. However, TKIP still makes use of RC4, a relatively weak encryption algorithm that was used due to hardware constraints on most of the devices originally designed to provide WEP.
TKIP also reduces the chance of replay attackers. TKIP expands the initialization vector (IV) to 48 bits from 24 bits, and combines this IV with the fixed key in a more cryptographically secure manner. Using a 48-bit IV means that any particular value of the IV can not be duplicated with a particular key. Thus, packets cannot be replayed. Guaranteeing that a particular key-IV pair is never reused also denies an attacker the ability to capture multiple packets that are identically encrypted, which would lead to the ability to extract the plain text messages.
Further, TKIP addresses WEP’s use of a single key by all clients. To create a base key, TKIP uses either a pass phrase or a master key derived from the authentication process, and several other pieces of information, such as a client’s MAC address. This base key in turn is used with the IV to create per-packet keys. So in theory, every packet sent over WPA is encrypted by a separate and unique key.
Finally, TKIP takes on weaknesses in key deployment by creating a base key that is different for each client. A client provides a shared secret for authentication and various other pieces of information. On wireless networks secured using WEP, all clients constantly use the same key, providing a large amount of cipher text for attackers to analyze. This also increases the probability of reuse of the 24-bit IV, exposing encrypted messages to attackers.
One fundamental problem continues for networks that have switched from WEP to WPA, or deployed WPA directly, yet do not use authentication. The initial pass phrase or secret deployed on clients and access points is often weaker than needed, since it usually must be human-readable and entered by a human. This immediately limits the pass phrase or secret to a subset of readable characters that can easily be entered from the keyboard. Furthermore, the length is often limited to 20 characters or less due to the difficulties associated with remembering or entering long strings of seemingly random text.
It is important to note that if robust authentication methods are not used with WPA, it must rely upon Pre-Shared Keys (PSK). The same secret phrase must be entered on all clients and all access points. This carries forward the key management issues inherent in WEP. In addition, it is virtually impossible to securely distribute the key or passphrase, as the secret information must be provided to all clients. A single malicious client can use this data to compromise other client sessions. Unfortunately, WPAPSK is relatively common due to the lack of a need for a separate authentication system.
802.1X – User Authentication And Network Access
In an attempt to address the lack of user authentication in WEP, support for the 802.1X protocol was added to WPA. The 802.1X protocol was originally designed for wired networks and only facilitates authentication, therefore it cannot guarantee secure authentication on wireless networks.
The first problem with 802.1X in a wireless network is that an attacker has access to the authentication packets sent and received by clients. If weak authentication methods are used (several are supported) or weak encryption is used (such as RC4), it may be possible for an attacker to discover the authentication credentials.
The second problem is that an attacker can execute a man-in-the-middle attack on the 802.1X authentication sequence. On a wired network this attack would be far more difficult, as an attacker would need physical access to the cable in between the client and the switch being accessed. On a wireless network , anyone within broadcast range has the ability to access. An attacker could be several hundred feet away with directional antennas. We will discuss in the later section “WPA2 : Under the Covers” how implementation of Extensible Authentication Protocol (EAP) methods such as TLS can mitigate against possible man-in-the-middle attacks.
The fourth problem is that with hard-wired devices, 802.1X will drop the port if the interface goes down – that is, if the cable is unplugged, or the device at the endpoint is not responsive. However, on wireless networks the status of the physical link condition cannot be trusted. An attacker can access the physical medium used to transmit the signal – the air, for example. Thus anyone within broadcast range could execute a denial-of-service attack against a client system and then take the client’s place before the wireless access point notices.
Additionally, attackers can send disassociation messages to wireless clients, preventing them from disconnecting properly from the access point by sending an 802.1X EAPOL Logoff message.
WPA Cracking Tools
There are a number of WPA cracking tools which attempt to determine the initial shared secret when WPA-P SK is used. Once this secret is known, the base key and session keys can be recreated, and traffic to and from clients and the access point can be decrypted on the fly. Alternatively, attackers can record traffic and then mount an offline attack at a later time, allowing use of greater computational resources.
For the majority of these tools to work, the attacker must be able to monitor the entire initial key exchange. An attacker who starts monitoring wireless traffic while clients are already connected will not be able to gather the proper data to crack the WPA encryption. However, it is relatively simple for an attacker to create a denial-of-service condition by sending disassociation packets to the clients. The clients then disconnect and reconnect, re-authenticating in the process and enabling attackers to view the needed data.
WPA is generally accepted as an interim step to provide incrementally improved security until WPA2 is available. Most devices that were upgraded to WPA capability are not capable of further upgrades. These devices are generally hardware-constrained, with minimal processing power and with RC4 as the only onboard encryption option.
The Way Forward
Wi-Fi Protected Access 2 (WPA2) and 802.11i
The 802.11i standard is virtually identical to WPA2, and the terms are often used interchangeably. 802.11i and WPA2 are not just the future of wireless access authentication – they are the future of wireless access . Wireless access is still in its infancy, in spite of the purchase and deployment of several million access points and wireless clients. The majority of these access points and clients are relatively immobile. Users sit down with their laptops at a conference table and connect, or a clerk stays within a relatively small area such as a warehouse, using wireless equipment to track inventory.
Increased Density Of Access Points
Wireless access in the future will feature increased density of access points. There are several reasons for this, including a greater need for bandwidth. An area covered by a single access point will not be able to provide as much bandwidth to clients as two access points. Also, in office buildings and other areas with stores located near each other, access points are typically not shared, but deployed separately within each location. Some residential areas already have multiple access points on each block. Finally, increased density benefits availability. If two or more access points cover an area and one of the access points fail, the area retains some degree of coverage.
Considering these factors, organizations will likely use more than one access point to cover a given area. But increasing the number of access points without a strategy for centralized management creates additional security risks. Robust management of access points is a key design requirement for TPI in the implementation of 802.11i based products.
Roaming Wireless Clients
Critical to 802.11i is the addition of fast secure roaming support for clients. This assists voice-over-IP (VoIP ) and other mobile applications that require continuous access. While some wireless 802.11 equipment currently supports fast secure roaming, it is usually vendor-specific, as no official standard existed prior to 802.11i that supported this function.
Currently, most wireless clients are relatively immobile, as few truly portable devices have come into use. Laptop users generally sit down at fixed locations to use their systems. However, in the future, more wireless devices (such as phones and PDAs) will support 802.11 –and these devices must roam. Also, due to the data types such portable roaming devices will likely carry, such as live voice and video, users will immediately notice any interruptions in service. And if such interruptions are common, the viability and use of live voice and video services becomes untenable. For network providers, access must be smooth and seamless while clients are roaming.
Robustness and availability are commonly forgotten yet important aspects of wireless networks . The majority of wireless networks have no failover or redundancy capabilities other than manual connection to a new access point when the one in use fails. As more wireless networks are deployed to carry critical traffic such as phone calls via the VoIP protocols, reliability and robustness will become more important. One benefit of 802.11i roaming support is that a client has de facto support to connect seamlessly to a new access point should the one in use fail. Of course, this will require service coverage of areas by one or more access points, but with costs falling, this is not a serious issue.
WPA2: Under the covers
WPA was provided as an interim solution, and it had a number of major constraints. WPA2 was designed as a future-proof solution based on lessons learned by WEP implementers. Symbol Technologies/Motorola is a key contributor and proponent of the WPA2 standard , and provides next-generation products based on this standard.
WPA2 will be a durable standard for many reasons. One of the most important choices was that of the encryption algorithm. In October 2000, the National Institute of Standards and Technology (NIST) designated the Advanced Encryption Standard (AES) as a robust successor to the aging Data Encryption Standard. AES is an extremely well-documented international encryption algorithm free of royalty or patent, with extensive public review.
WPA2, like WPA, supports two modes of security, sometimes referred to as “home user” and “corporate.” In “home user” mode a pre-shared secret is used, much like WEP or WAP . Access points and clients are all manually configured to use the same secret of up to 64 ASCII characters, such as “this_is_our_secret_password.” An actual 256-bit randomly generated number may also be used, but this is difficult to enter manually into client configurations.
The “corporate” security is based on 802.1X, the EAP authentication framework (including Radius), one of several EAP types (such as EAP/TLS, which provides a much stronger authentication system), and secure key distribution.
WPA2 and 802.1X
While 802.1X as a standard preceded 802.11i, it is proving to be a key enabler for secure and flexible wireless networks , allowing for client authentication, wireless network authentication , key distribution and the pre-authentication necessary for roaming. In using 802.1X in conjunction with 802.11i , it is strongly suggested to use EAP as a framework for authentication, and use an EAP type for the actual authentication that provides the optimal balance between cost, manageability and risk mitigation. Most often an 802.1X setup uses EAP-TLS for authentication between the wireless client (supplicant) and the access point (authenticator). In theory, several options may replace EAP-TLS, but in practice this is rare.
The 802.1X authentication protocol as deployed with 802.11i provides a number of services:
- Capabilities negotiation between the client and wireless network provider
- Client authentication to the wireless network provider
- Authentication of the wireless network provider to the client
- A key distribution mechanism for encryption of wireless traffic
- Pre-authentication for roaming clients
In wired 802.1X , the network port is in a controlled state prior to authentication. But on wireless networks no such port exists until the client connects and associates to the wireless access point . This immediately poses a problem, since beacon packets and probe request/response packets cannot be protected or authenticated. Fortunately, access to this data is not very useful for attackers, other than for potentially causing denial-of-service attacks, and for identifying wireless clients and access points by their hardware MAC addresses.
An 802.1X wireless setup consists of three main components:
- Supplicant (the wireless client )
- Authenticator (the access point )
- Authentication server (usually a Radius server)
The supplicant initially connects to the authenticator, as it would to a WEP- or WPA-protected network. Once this connection is established, the supplicant has in effect a network link to the authenticator (access point). The supplicant can then use this link to authenticate and gain further network access. The supplicant and authenticator first negotiate capabilities. These consist of three items:
- The pairwise cipher suite, used to encrypt unicast (point-to-point) traffic
- The group cipher suite, used to encrypt multicast and broadcast (point-to-multiple-points) traffic
- The use of either a pre-shared key (PSK, or “home user” security, using a shared secret) or 802.1X authentication
Several problems arise from the constraints of wireless networking . First, the supplicant must have local copies of the root certificates used by the certificate authority to sign the authenticator’s certificate. Because the authenticator (the wireless access point) fully controls the supplicant’s access to the network, a hostile authenticator can modify or redirect traffic in any way, and could point the user to fake certificate authority sites. Even if the supplicant has a local copy of the root certificate used to sign the authenticator’s certificate, a compromised certificate placed in a certificate revocation list (CRL) may not be detected if the authenticator provides the supplicant with false or old CRL data. Therefore, any compromised authenticator certificates pose a significant risk to wireless network clients, especially since many will not check for certificate revocation.
The key exchange consists of a Master Key (MK) generated on the authentication server and in the supplicant. The MK is sent to the authenticator. The Pairwise Master Key (PMK) is generated from the MK and the Group Master Key (GMK) is generated by the authenticator. The PMK and GMK keys are then used as needed to generate temporal keys, used to encrypt individual frames sent on the wireless network. These keys are known as Pairwise Transient Keys (PTK) and Groupwise Transient Keys (GTK).
The PTK is used to encrypt traffic to and from the supplicant and the authenticator. The GTK is used to encrypt broadcast or multicast traffic sent to all hosts on a particular wireless network.
WPA2 and TKIP
WPA2 supports the use of the TKIP encryption scheme to provide backward compatibility with WPA equipment. As 802.11i equipment becomes ubiquitous, networks will drop support for TKIP and WPA, removing a number of potential security vulnerabilities.
TKIP uses a new key for each frame that is encrypted; the keys used to encrypt these frames are called either the Pairwise Temporal Key (for unicast traffic) or Groupwise Temporal Key (for multicast and broadcast traffic). These keys are generated from the Pairwise Master Key (PMK) and Groupwise Master Key (GMK).
The majority of weaknesses in TKIP under WPA are due to a weak encryption algorithm. This problem is securely addressed with TKIP under WPA2. By using 802.1X and EAP-TLS to handle key distribution, keys are transferred securely and are not as prone to attack. The use of an extremely strong cipher, AES, addresses the weaknesses of RC4. Finally, the use of strong key lengths, 128 bits, significantly reduces the chance of a successful brute force attack against AES-encrypted wireless traffic.
WPA2 and CCMP
Moving forward, the 802.11i (and by extension WPA2) standards call for the use of Counter Mode with Cipher Block Chaining Message Authentication Code Protocol (CCMP), which specifies use of CCM with the AES block cipher. CCM is a general-purpose cipher mode that does not specify the block cipher to use. The CBC-MAC portion provides data integrity and authentication while the counter mode does the actual encryption, protecting the data from eavesdroppers. It is expected that TKIP (using RC4) will be phased out in favor of CCMP as networks transition to pure WPA2 configurations, removing security risks present in support for WPA.
When a packet is encrypted using CCMP, a number of data fields are added. The first field is the message integrity code (MIC), which is appended to the data. The MIC includes the hardware MAC addresses of the source and destination; this data essentially acts as a very strong cryptographically secure hashing function, which prevents man-in-the-middle attacks and other risks. The data and the MIC are then encrypted using the appropriate encryption key.
The packet is then modified with a data header. The first portion of data contained in the packet is the IV and key ID (4 bytes), which is needed to identify the encryption key used to encrypt the packet. At this point an extended IV (4 bytes) is attached to the packet. This field and the IV with key ID field are not encrypted, as the remote end must identify which key was used to encrypt a packet and the packet’s sequence number. The first IV ensures that data is ordered properly. The rest of the packet contains the encrypted payload of data and MIC. The resulting packet is shown below.
The data encrypted in the data payload and MIC field use the temporal key. This key changes for each frame and is generated from the master key, which is in turn generated from the 802.1X authentication performed by the user.
The MIC calculation and encryption of the data payload are done at the same time. This greatly speeds up encryption of packets and reduces the latency introduced by encryption.
WPA2 and Fast Roaming
WPA2 neatly solves the problem of roaming (and failover) in two ways: through the use of Pre-Authentication and PMK Caching .
When a client re-associates with an access point , it uses a PMK from an older 802.1X authentication executed on the same access point. On this new association, no 802.1X exchange happens; the client immediately carries out the 802.11i handshake and is ready to send/receive data.
When the client loses the connection with the first access point – or otherwise decides to move to the second access point (because of signal strength, for example), it must only change radio frequencies and establish a base 802.11 connection with a second access point that it associated with previously. Once this is completed, the client only needs to perform the 802.11i handshakes to establish the PTK and the Groupwise Master Key before beginning communication, since authentication has already taken place.
When a client is associated with an access point and hears a beacon from another access point with the same SSID and security policy, it carries out an 802.1X authentication with that access point over the wire. The client and access point derive the PMK and keep it cached. Now if the client roams over to the new access point, it already has a PMK – the 802.1X authentication phase is skipped.
TPI Can Navigate These Waters
There is no disputing the benefits that wireless local area networks provide to enterprises. Information technology departments have a mandate to provide wireless services in support of business initiatives, as well as a responsibility to provide these services securely. The history of 802.11 -based WLANs has been a legacy of insecurity and significant risk to early adopters. Both WEP and its interim successor WPA have provided only minor obstacles to determined hackers and should be deployed with caution.
The ratification of IEEE 802.11i laid the foundation for drastic improvements in wireless security . WPA2 offers more formidable encryption, better key management , and robust authentication , as well as access point roaming. Motorola/ Symbol Technologies has implemented 802.11i compliance within a next-generation family of upgradeable wireless switches , the WS2000 and WS5100, providing centralized management of access points and a highly scalable architecture.
Bottom Line: TPI has the experience and expertise to provide the most flexible and cost-efficient wireless network design for your business.